15
. IGNITION SYSTEM
IGNITION COIL
REMOVAL
Remove the frame body cover. ( 2)
Remove the spark plug cap.
Disconnect the ignition coil wires and remove
the ignition coil bolt and ignition coil.
INSPECTION
CONTINUITY TEST
*
This test is to inspect the continuity of
ignition coil.
Measure the resistance between the ignition
coil primary coil terminals.
Resistance: 0.1~1.0Ω/20℃
Measure the secondary coil resistances with
and without the spark plug cap.
Resistances:
(with plug cap): 7~12KΩ/20℃
(without plug cap): 2~4KΩ/20℃
*
Correctly operate the tester following the
manufacturer's instructions.
15-5
PEOPLE S 4T
Ignition Coil