KYMCO PEOPLE S 125 Service Manual page 139

12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
Remove the main piston and spring from the
brake master cylinder.
Clean the inside of the master cylinder and
brake reservoir with brake fluid.
INSPECTION
Measure the brake master cylinder I.D.
Inspect the master cylinder for scratches or
cracks.
Service Limit: 12.75mm
Measure the brake master cylinder piston
O.D.
Service Limit: 12.75mm
Before assembly, inspect the lst and 2nd
rubber cups for wear or damage.
ASSEMBLY
Before assembly, apply brake fluid to all
removed parts.
Install the spring together with the 1st rubber
cup.
＊
• During assembly, the main piston and
spring must be installed as a unit
without exchange.
• When assembling the piston, soak the
cups in brake fluid for a while.
• Install the cups with the cup lips facing
the correct direction.
Install the main piston, spring and snap ring.
Install the diaphragm.
Install the brake lever.
Main
Diaphragm
Snap Ring
Main
Diaphragm
Snap Ring
PEOPLE S 4T
Master Cylinder
Spring
Master Cylinder
Spring
12-10