10
. FINAL REDUCTION
Install the transmission case cover.
Install and tighten the transmission case
cover bolts.
Install the clutch/driven pulley. ( 9-13)
Install the rear wheel. ( 13-3)
Install the rear brake cable. ( 13-5)
After installation, fill the transmission case
with the specified oil. ( 3-7)
*
• Place the motorcycle on its main
stand on level ground.
• Check the oil sealing washer for wear
or damage.
Specified Gear Oil:
KYMCO SIGMA GEAR OIL SAE 90#
Oil Capacity:
At disassembly : 0.21 liter, 50cc 0.12liter
At change
Install and tighten the oil check bolt.
Torque: 1.0~1.5kg-m
Start the engine and check for oil leaks.
Check the oil level from the oil check bolt hole
and add the specified oil to the proper level if
the oil level is low.
: 0.181 liter, 50cc 0.09liter
PEOPLE S 4T
Transmission Case Cover
Bolts
Oil Check Bolt Hole/Oil Filler
Drain Bolt
10-6