Snom Profile Setup - ZyXEL Communications X6004 User Manual

Hide thumbs Also See for X6004:

Table of Contents

7.3 snom Profile Setup

If an auto provisioning file has been configured for a SIP extension, this screen

displays the mapping between SIP extensions and snom VoIP device's MAC

addresses or serial numbers. To access this screen, click Configuration > PBX >

Server Configuration > Auto Provision > snom Profile Setup.

Figure 70 Auto Provision > snom Profile Setup

Each field is described in the following table.

Table 35 Auto Provision > snom Profile Setup

Service Config-

Auto Provision

Configuration

XML download

X6004 User's Guide

This indicates the X6004's identification number.

Select Enable to turn on auto provisioning for this device, or Disable

to turn it off.

With the snom auto provision service enabled and at least one peer with

the phone type set to snom auto provision, you can click Download to

download a single XML file containing the configuration of all the SIP

peers with the phone type set as snom.

After you've downloaded the XML batch configuration file, you can edit

it and use Browse and Upload to copy it to the X6004.

Chapter 7 Auto Provision