Add An Administrator - ZyXEL Communications X6004 User Manual

Chapter 30 Administrator Accounts

30.3.1 Add an Administrator

Use this screen to create new administrator accounts. To access this screen, click
Maintenance > Administrator List > Add.
Figure 258 Administrator List > Add
Each field is described in the following table.
Table 175 Administrator List > Add
LABEL
Create a new
administrator
Username
Password
Confirm
Password
Description
Rank
Apply
Cancel
434
DESCRIPTION
Type a username for this administrator. You can use up to 20
alphanumeric characters. Spaces are not allowed. The first character
must be a letter.
Type a password for this administrator account. You can use up to 32
alphanumeric characters and spaces are not allowed.
Retype the new password for this administrator account.
Type a short description for this administrator account. You can use up
to 63 alphanumeric characters. Spaces are allowed.
Select the rank you want this administrator account to have. You can
select:
• Full admin - to allow this account to perform all configuration
changes on the X6004.
this account has the same privilege level as
• Debug admin - if
the read only account
service technicians to perform additional diagnostics.
• Read only - to allow this account to only be able to view
configuration details on the X6004.
Click this to save your changes.
Click this to return to the previous screen without saving your changes.
. This type of account is reserved for use by
X6004 User's Guide