Chapter 39 Troubleshooting
39.6.3.2 The IP Address Screen
This screen allows you to configure the X6004's WAN and LAN IP settings.
Figure 307 The IP Address Screen
The following table describes the labels in this screen.
Table 210 Initrd
LABEL
Wan_ip_realtime Host
Netmask
Wan_gw_realtime
Host
Lan_ip_realtime Host
Netmask
WAN default
LAN default
Main Menu
520
+------------IP Address------------+
| Wan_ip_realtime Host Netmask
| Wan_gw_realtime Host
| Lan_ip_realtime Host Netmask
| WAN default
| LAN default
|
| Main Menu
+----------------------------------+
DESCRIPTION
Select this option and press [Enter]. When the command line
dialogue appears, type in the required information and then
press [Enter] again.
Select this option and press [Enter]. When the command line
dialogue appears, type in the required information and then
press [Enter] again.
Select this option and press [Enter]. When the command line
dialogue appears, type in the required information and then
press [Enter] again.
Select this to reset the X6004's WAN IP address to its factory
default of "172.16.1.1".
Select this to reset the X6004's LAN IP address to its factory
default of "192.168.1.12".
Select this to return to the initrd main screen.
|
|
|
|
|
|
|
X6004 User's Guide