Edit Group Management Associations - ZyXEL Communications X6004 User Manual

Chapter 21 Group Management

21.2.2 Edit Group Management Associations

Use this screen to configure links from an authority group or an outbound line
group to authority groups, LCRs or ring groups configured on the X6004. To access
this screen, click the Advanced icon next to the group you want to configure in
the Configuration > PBX > Group Management screen.
Figure 192 Advanced > (Group Type) > (Group Name)
Each field is described in the following table.
Table 113 Advanced > (Group Type) > (Group Name)
LABEL
Accessible
Group List
Group Name
Description
Group Type
Associations
Apply
Cancel
326
DESCRIPTION
The table below shows which links you can create from the group
(authority group or outbound line group) identified in the Group Name
field above the table.
This field displays the name of an authority group, LCR or ring group to
which you can configure a link.
This field displays the description of the group to which you can create a
link.
This field identifies whether you are creating a link to:
Authority Group - another set of extensions on the X6004.
LCR - an outbound dialing rule containing outbound line groups.
Select this checkbox to link a group you are configuring to another
group.
Clear this checkbox to remove a link between the group you are
configuring and another group.
Click this to save your changes.
Click this to go back to the previous screen.
X6004 User's Guide