The Ftp Screen - ZyXEL Communications X6004 User Manual

Table 184 SSH > Add/Edit (continued)
LABEL
Apply
Cancel

33.6 The FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the X6004's
firmware and configuration files, please see the
firmware and configuration file maintenance details. To use this feature, your
computer must have an FTP client.
To change your X6004's FTP settings, click Maintenance > Administration >
Remote Management > FTP. The screen appears as shown. Use this screen to
specify which interfaces allow FTP access and from which IP address the access
can come.
Figure 269 Remote Management > FTP
The following table describes the labels in this screen.
Table 185 Remote Management > FTP
LABEL
Activate FTP
Remote
Management
White List
#
Access
Interface
X6004 User's Guide
DESCRIPTION
Click this to save your changes and to apply them to the X6004.
Click this to begin configuring the fields again.
DESCRIPTION
Select this to allow only computers which use any IP addresses listed in
this screen to access your X6004 via an FTP connection.
This field displays the index number of records in this table.
This field displays the interface(s) through which a computer may
access the X6004 using this service.
Chapter 33 Remote Management
Chapter 35 on page 469 for
453