Replacing A Standard Backrest With Quick Release - Invacare Fox Service Manual

SERVICE MANUAL

7.13.2 Replacing a standard backrest with quick release

Requirements:
· Phillips screwdriver, size 2
· 5 mm Allen key
· 13 mm open-ended spanner
Note
When disassembling, take care of small parts such as screws and washers. Put all small parts
down so that they can be reassembled in the right sequence.
Dismantling the backrest unit:
·
Remove the backrest unit, as described in chapter 7.13.1.
·
Loosen and remove the Allen screw (9) including washers (8), bushings (5) and nut (3) on the
left-hand and right-hand side of the chair. Use an Allen key and an open-ended spanner.
·
Pull the quick release cord (1) to unlock the backrest tube.
62
®
Invacare - Fox