Anti-Tipper Wheels - Invacare Fox Service Manual

®
Invacare - Fox
Refitting the wheel:
·
Refit the parts in reverse order.
·
When installing the wheel, pay attention to the correct direction of rotation.
·
Tighten the nut (3) to 35 Nm +/-10% Nm.
7.9

Anti-tipper wheels

Requirements:
· 6 mm Allen key
· 13 mm ring spanner or jaw spanner
Removing the anti-tipper wheel:
·
Loosen the screw (2) with a 6 mm Allen key. Hold the self-locking axle nut (1) with a 13 mm ring
or open-ended spanner against turning.
·
Remove the screw (2), the washer (4) and the axle nut (1).
·
Pull the wheel (3) out of the axle.
·
Replace the anti-tipper wheel.
Refitting the anti-tipper wheel:
·
Refit the parts in reverse order.
·
Tighten the axle nuts just tight enough that the wheel can still rotate without resistance.
SERVICE MANUAL
47