Invacare Fox Service Manual page 54

SERVICE MANUAL
·
Loosen and remove the bolts (3) incl. fixing (4), the round disk (6), the washer and the nut (7)
from the legrest holder. Repeat these stages on the other side of the seat frame (1).
·
Remove the backrest unit, as described in chapter 7.13.
·
Remove the fixing bolts (2) for the armrests (8).
·
Loosen and remove the bolt (14) incl. rosette (13), the round disk (12), the washer (11) and the
nut from the seat extension.
·
Loosen and remove the bolts (10) with a 6 mm Allen key. Repeat these stages on the other
side of the seat frame (1).
·
Remove the seat frame from the seat support (9).
·
Replace the seat frame or seat support.
Refitting the seat frame:
·
Assemble the parts in reverse order.
Note
When refitting, ensure that the round disks (6) (12) are in the correct position.
·
Check all functions of the vehicle and go for a test drive.
54
®
Invacare - Fox