SERVICE MANUAL
7.7.3
Changing the wheelbase
Requirements:
· 5 mm Allen key
· 10 mm socket spanner
·
Remove the seat, as described in chapter 7.12.1.
·
Loosen and remove the screw and nut (3).
·
Adjust the center column (see illustrations).
Long wheelbase
Adjustment of centre column (1) on chassis ->
The scale (2) is at the front.
Short wheelbase
Rotating the centre column:
Adjustment of centre column (1) on chassis ->
The scale (2) is at the back
Note
Changing the wheelbase influences the seat depth and the centre of gravity (chapter 9.4).
You may need to adjust the seat depth to meet your requirements. Please refer to chapter 9.1.2.
·
Refit the parts in reverse order.
·
Check all functions of the vehicle and go for a test drive.
38
®
Invacare
- Fox