®
Invacare
- Fox
7.2.2
Replace remote
Note
Replacing the remote is very easy and is not described in detail.
However, when replacing a remote in connection with the power module, please take the final
selection of the drive program into account as described in chapter 7.2.3.
7.2.3
Drive program selection after component replacement
The drive program is saved in the remote and in the power module. If one of these two components
is replaced, the system must be told which of the components has not been replaced so that it
knows which contains the current controller profile.
Note
The system allows normal usage of the mobility aid after component replacement only if the
profile is selected afterwards.
SERVICE MANUAL
27