®
Invacare
- Fox
8
Installing accessories
8.1
Replacing the holding strap
Requirements:
· 13 mm open-ended spanner
· 5 mm Allen key
Note
A spacer washer (4) is fixed between the two washers so that the belt mounting can rotate freely.
·
Remove the plastic cap (2).
·
Loosen the screw (6) and the associated nut (3) with a 5 mm Allen key and a 13 mm open-
ended spanner.
·
Remove the nut (3).
·
Remove the screw (6) including safety belt and flat washers (2) and (4).
·
Replace the safety belt (1)
·
Refit the parts in the reverse order.
SERVICE MANUAL
67