Invacare Fox Service Manual page 63

®
Invacare - Fox
·
Loosen and remove the Allen screws (9) including washers (8), stopper (12) and nut (13) on
the left-hand and right-hand side of the chair. Use an Allen key and an open-ended spanner.
·
Remove the backrest holders (6) including quick release cord (1).
Refitting the backrest unit:
·
Replace the parts in the reverse order.
·
Refit the backrest unit, as described in chapter 7.13.1.
·
To conclude, you should always carry out a trial run to test the vehicle functions.
SERVICE MANUAL
63