SERVICE MANUAL
·
Fix the bolts (3) in the required drill hole (A or B).
Fixing (A) = short wheelbase - 51 cm seat height - high/rear
Fixing (B) = long wheelbase - 51 cm seat height - high/front
·
Place the seat vertically onto its holder again.
·
Fold the seat forwards.
·
Ensure that the safety latches engage on the centre column.
·
Check all functions of the vehicle and go for a test drive.
9.3
Adjusting the seat tilt
See user manual.
9.4
Adjusting the center of gravity of the seat
The center of gravity of the seat can be adjusted by mounting the seat frame farther towards the
front or the rear on the seat.
CAUTION!
The seating system of the electric wheelchair is delivered ex works with an optimally
adjusted center of gravity. Any change in this adjustment setting can negatively influence
the stability of the electric wheelchair.
· You must perform an individual risk analysis every time you change the center of gravity of
the seating position, in order to ensure the safety and stability of the electric wheelchair.
76
®
Invacare
- Fox