Adjusting The Seat Depth Via The Backrest Unit (Fabric Seat Padded) - Invacare Fox Service Manual

®
Invacare - Fox
9.1.2.1

Adjusting the seat depth via the backrest unit (fabric seat padded)

ATTENTION: Danger of crushing!
The seat/seat support is very heavy. Danger of injury to hands and feet!
· Use proper lifting techniques
Requirements:
· Phillips screwdriver, size 2
· 8 mm open-ended spanner
· Side cutting pliers
· Cable ties
Note
When disassembling, take care of small parts such as screws and washers. Put all small parts
down so that they can be reassembled in the right sequence.
·
Remove the seat, as described in chapter 7.12.3.
·
Push the backrest unit (3) as far as the required drill hole in the seat frames (1).
·
Fix the seat as described in chapter 7.12.3.
·
Fix the bolts (2) incl. rosette, round disc, washer and nut. Ensure that the round disc is fitted
correctly.
Note
The screws (2) are fixed by the fabric seat (see chapter 7.12.3).
·
Check all functions during a test drive.
SERVICE MANUAL
73