Adjusting The Seat Depth Via The Backrest Unit (Fabric Seat Strechted) - Invacare Fox Service Manual

SERVICE MANUAL
9.1.2.2

Adjusting the seat depth via the backrest unit (fabric seat strechted)

ATTENTION: Danger of crushing!
The seat/seat support is very heavy. Danger of injury to hands and feet!
· Use proper lifting techniques
Requirements:
· Phillips screwdriver, size 2
· 8 mm open-ended spanner
· Side cutting pliers
· Cable ties
Note
When disassembling, take care of small parts such as screws and washers. Put all small parts
down so that they can be reassembled in the right sequence.
·
Loosen and remove rhe screws (2).
·
Position the backrest mounting bracket (3) according to the seat depth, so that the drill hole
aligns with the seat frame at (2) and (3).
·
Tighten the set screw underneath the backrest mounting bracket (3) slightly.
·
Insert the backrest tube into the backrest mounting bracket as described in chapter 7.13.
·
Fix the seat as described in chapter 7.12.4 or 7.12.5.
Note
The screws (2) are fixed by the fabric seat (see chapter 7.12.4).
·
Check all functions during a test drive.
74
®
Invacare - Fox