Replacing The Fabric Seat (Padded) - Invacare Fox Service Manual

®
Invacare - Fox

7.12.3 Replacing the fabric seat (padded)

ATTENTION: Danger of crushing!
The seat/seat support is very heavy. Danger of injury to hands and feet!
· Use proper lifting techniques
Requirements:
· Phillips screwdriver, size 2
· 8 mm open-ended spanner
·
Remove the seat cushion.
·
Remove the armrests as described in chapter 7.14.1.
Dismantling the fabric seat:
·
Loosen and remove the six screws (1) including rosette with a Phillips screwdriver.
·
Loosen and remove the screw (4) including the rosette, the circular washer (3), washer and
the nut (2). The screw (4) is also used to adjust the seat depth (5), see chapter 9.1.2.1.
·
Replace the fabric seat.
Refitting the fabric seat:
·
Refit the parts in reverse order.
Note
When refitting, ensure that the round disk (3) is in the correct position.
The bolts (4) are fixed by the fabric seat at the end.
·
To conclude, you should always carry out a trial run to test the vehicle functions.
SERVICE MANUAL
55