Backrest Unit; Replacing The Standard Backrest - Invacare Fox Service Manual

®
Invacare - Fox
7.13

Backrest unit

7.13.1 Replacing the standard backrest

Requirements:
· Phillips screwdriver, size 2
Dismantling the backrest unit:
·
Remove the backrest tube (1) from the backrest holder (2) by loosening the handwheels.
·
Loosen and remove the screws (5), including the washers with a Phillips screwdriver.
·
Remove the handwheels (4).
·
Remove the backrest tube (1) from the fabric back (2).
·
Replace the backrest holders, as decribed in chapter 7.13.2.
·
.
Refitting the backrest unit:
·
Replace the parts in the reverse order.
·
To conclude, you should always carry out a trial run to test the vehicle functions
SERVICE MANUAL
61