Replacing The Safety Latch; Adjusting The Safety Latch - Invacare Fox Service Manual

SERVICE MANUAL

7.12.6 Replacing the safety latch

Requirements:
· 24 mm open-ended spanner
·
Remove the seat, as described in chapter 7.12.1.
Dismantling the safety latch:
·
Loosen the adjusting ring using a 24 mm open-ended spanner.
·
Unscrew the safety latch (1) and replace it.
Refitting the safety latch:
·
Refit the parts in reverse order.
·
Screw the safety latch (1) in and adjust it.

7.12.7 Adjusting the safety latch

Requirements:
· 24 mm open-ended spanner
·
Loosen the adjusting ring using a 24 mm open-ended spanner.
·
Screw the safety latch (1) in so that the spring-loaded catch engages securely and is flush with
the outside edge when it is pulled.
·
Tighten the adjusting ring hand-tight with a 24 mm open-ended spanner (15 Nm +/-1 Nm).
60
®
Invacare - Fox