®
Invacare
- Fox
9.2
Adjusting the seat height
9.2.1
Adjusting seat height above centre column
See user manual.
9.2.2
Adjusting seat height above seat support
ATTENTION: Danger of crushing!
The seat/seat support is very heavy. Danger of injury to hands and feet!
· Use proper lifting techniques
Requirements:
· 6 mm Allen key
· 8 mm open-ended spanner
Note
When disassembling, take care of small parts such as screws and washers. Put all small parts
down so that they can be reassembled in the right sequence.
·
Put the seat into the service position as described in chapter 7.12.1 and separate the seat from
the chassis.
·
Loosen and remove the bolts (3) with a 6 mm Allen key. Hold the nut (in the figure (2) this is
covered) against turning using an 8 mm open-ended spanner. Repeat these stages on the
other side of the seat frame (1).
SERVICE MANUAL
75