Install The Inner Rail Extensions; Figure 3-2 Installing The Inner Rail Extensions - Silicon Graphics Rackable C2112-4GP3 User Manual

3: Server Installation

Install the Inner Rail Extensions

20
6. Press the button where the two outer rails are joined to retract the smaller outer rail.
7. Hang the hooks of the rails onto the rack holes and if desired, use screws to secure the front
of the outer rail onto the rack.
8. Repeat steps 5-7 for the remaining outer rail.
The server chassis includes a set of inner rails in two sections: inner rails and inner rail extensions.
The inner rails are pre-attached to the chassis, and do not interfere with normal use of the chassis
if you decide not to use a server rack. The inner rail extensions are attached to the inner rails to
mount the chassis in the rack.
Perform the following steps to install the inner rail extensions as illustrated in
1. Place the inner rail extensions on the side of the chassis aligning the hooks of the chassis
with the rail extension holes. Make sure the extension faces outward just like the
pre-attached inner rail.
2. Slide the extension toward the front of the chassis.
3. Secure the chassis with two screws as illustrated.
4. Repeat the prior steps for the other inner rail extension.
Figure 3-2 Installing the Inner Rail Extensions
Figure 3-2:
007-6363-001