Creating A New Color Calibration - Xerox Wide Format 6604 User Manual

Scanning Documents
NOTE
Refer to the Maintenance chapter for cleaning the scanner prior to scanning the
Color Calibration targets. Cleaning the five Contact Image Sensors and the Document
Feed Rollers ensures improved image quality if it has been some time since it was
last done. Ensure the areas are fully dry before scanning your originals.

Creating a new Color Calibration

1. Select Scan to Remote Printer from the Services menu.
2. Select Destination.
The Select a Destination Remote Printer screen displays.
3. Select your destination color printer.
4. Select Color Calibration.
5. Select Create.
The Enter a Profile Set Name screen displays.
NOTE
When you select the Create button in the step above, if there had been a
previously started calibration session that was incomplete or not saved, you
have the option to resume where you left off or start fresh with creating a new
calibration. The Current Color Calibration Session screen displays with these
choices. Be advised that if you select the Create button, the calibration previously
started is deleted.
6. Enter a profile set name. Select Save.
The Create Color Profile Set screen displays.
NOTE
By default, the available quality level options supported on the Remote Printer
are shown. A calibration target prints for each selected quality level.
7. Deselect the Quality Levels you wish to exclude in the calibrated profile set.
8. Select Print.
3-28 ®
Xerox Wide Format 6604/6605 Solution
User Guide