Controller Front View - Xerox Wide Format 6604 User Manual

Table 3: Machine Components (Front View Doors Open)
Num. Component
1 Manual Feed-in Shelf
(Bypass)
2 Fuser Cover
3 Media Heater Switch
4 Cutter Button
5 Cutter Cover
6 Roll 1
7 Roll 2

Controller Front View

The Accxes Controller communicates with the Print Engine/machine via the Command
Status Interface. The Command Status Interface software provides status messages
about the operation of the print engine.
®
Xerox Wide Format 6604/6605 Solution
User Guide
Function
Open and load media here when making manual feed
copies or prints.
Open the Manual Feed-in Shelf and then the Fuser Cover
to clear a paper jam in the fuser.
Switches the media heater on/off. Powering on the media
heater helps prevent the media from wrinkling. The media
heater switch is normally on.
Cuts the lead edge of roll media.
Covers the cutter to cut media. Normally, do not open
this cover.
Load the roll media here.
A second roll (shown here) may be installed below Roll
1. This roll is optional.
Product Overview
1-5