Table of Contents
Advertisement
System Administrator
See Online Help in Web Printer Management Tool for more details about using the
Immediate Image Overwrite feature.
Immediate Image Overwrite Algorithm
The overwrite algorithm for both IIO and ODIO conforms to the U.S. Department of
Defense Directive 5200.28-M (Section 7, Part 2, paragraph 7-202), and is common to
all WorkCentre/WorkCentre Pros and Accxes controllers.
The algorithm for the Image Overwrite feature is:
• Pattern #1 is written to the sectors containing temporary files (IIO) or to the entire
spooling area of the disk (ODIO). (hex value 0x35 (ASCII "5")).
• Pattern #2 is written to the sectors containing temporary files (IIO) or to the entire
spooling area of the disk (ODIO). (hex value 0xCA (ASCII compliment of 5)).
• Pattern #3 is written to the sectors containing temporary files (IIO) or to the entire
spooling area of the disk (ODIO). (hex value 0x97 (ASCII "ú")).
• 10% of the overwritten area is sampled to ensure Pattern #3 was properly written.
The 10% sampling is accomplished by sampling a random 10% of the overwritten
area.
See Online Help in Web Printer Management Tool for more details about using the
Immediate Image Overwrite feature.
Scan Display
This feature displays a scanned preview as your original is fed into the Scanner. The
preview reflects data taken directly from the Scanner and may not represent the quality
of the final output. Depending on the scan mode, additional image conversion takes
place beyond the initial scan.
Check mark the Scan Display box located on the Basic Copy screen to enable.
If the Scan Display box is not visible on the Basic Copy screen, it has been disabled by
the System Administrator in Machine Information > Administration
> General Administration > Set Scan Display.
Set Thumbnail Creation
Thumbnails are miniature images of the scanned document that display on the Job
Information screen.
Thumbnails are the first page of a multipage job. They are used for job recognition.
Thumbnails only display if the feature has been enabled in the General Administration
screen and can be disabled when the System Administrator sets up a lockout password
to the feature.
5-14
®
Xerox
Wide Format 6604/6605 Solution
User Guide
Advertisement
Table of Contents
