Scan Display; Setting Up The Image Quality Selections; Density - Xerox Wide Format 6604 User Manual

6. When the copy job is finished, select the Printer Interrupt button again to resume
the print job.
NOTE
If you forget to select Printer Interrupt to resume the print job, it will be canceled
automatically as a default.
NOTE
The Print Interrupt Timeout period may be changed from the one minute default
up to 99 minutes. Print Interrupt Timeout can be reset by the Administrator.
Refer to the System Administration chapter for details.

Scan Display

This feature displays a scanned preview as your original is fed into the Scanner. The
preview reflects data taken directly from the Scanner and may not represent the quality
of the final output. Depending on the scan mode, additional image conversion takes
place beyond the initial scan.
Check mark the Scan Display box located on the Basic Copy screen to enable.
If the Scan Display box is not visible on the Basic Copy screen, it has been disabled by
the System Administrator in Machine Information > Administration
> General Administration > Set Scan Display.

Setting Up the Image Quality Selections

You can configure the Image Quality features displayed to ensure that you obtain the
best image results from each original.
This section provides procedures for setting up the following:

• Density

• Contrast
• White Point
Density
The Density option allows you to adjust the lightness or darkness of the copies relative
to the original.
1. Select Copy on the Services menu.
The Copy screen displays.
2. Select the Image Quality tab.
3. Select the best Density match using the scroll key.
®
Xerox Wide Format 6604/6605 Solution
User Guide
Printing and Copying Documents
2-17