Shutdown From The User Interface - Xerox Wide Format 6604 User Manual

When the Circuit Breaker Switch is in the up or On [ | ] position, input power is supplied
to the machine. If the machine is not used for an extended period, the Printer and the
Controller may be powered down. See the System Administrator for this task. Check the
Circuit Breaker once a month for correct operation. If you notice any unusual conditions,
contact your Xerox Customer Support Center.
To check the Circuit Breaker:
1. Ensure that all print jobs have finished processing before proceeding.
2. Select Shutdown from either the User Interface or from the Web Printer Management
Tool.
3. Press the Test button while the Circuit Breaker Switch is in the On | position. If the
Circuit Breaker turns off, it is operating correctly.
4. Reset the Circuit Breaker Switch and perform the System Power On procedure in
Product Overview Chapter.

Shutdown from the User Interface

NOTE
Many of the features within the Administration tab require a password for access.
See your System Administrator for the password prior to getting started unless
the Administrator mode is already active.
NOTE
System Shutdown and Restart is used to reboot the system. This option will
not completely shut down the controller
1. Select Machine Info from either the Services menu, or by pressing the Machine Info
button located on the Control Panel.
2. Select the Administration tab.
3. Select General Administration.
4. If the Enter SA Password screen displays, enter the System Administrator password,
then press Enter.
5. Select Shutdown/Restart. . .from the General Administration screen.
®
Xerox Wide Format 6604/6605 Solution
User Guide
System Administrator
5-11