Resetting Jobs (Welding Tasks) To The Factory Settings; Resetting A Single Job; Resetting All Jobs - EWM PHOENIX 333 PROGRESS PULS forceArc Operating Instructions Manual

5.7

Resetting JOBs (welding tasks) to the factory settings

5.7.1

Resetting a single JOB

Operating
element
m/min
5.7.2

Resetting all JOBs

Operating
element
m/min
Item No.: 099-005073-EWM01
Action Result
Select JOB Reset
3 sec.
Set the JOB number to be reset
Confirm JOB reset.
(If not pressed within approx. 3 seconds, the machine switches to the
last parameters displayed and the JOB reset process is cancelled)
Action Result
Select JOB Reset
3 sec.
Set "All Reset" (after JOB 251)
Confirm JOB reset.
(If not pressed within approx. 3 seconds, the machine switches to the
last parameters displayed and the JOB reset process is cancelled)
Functional characteristics
Resetting JOBs (welding tasks) to the factory settings
Display
Display
67