Welding Process Changeover - EWM PHOENIX 333 PROGRESS PULS forceArc Operating Instructions Manual

5.2.6.7

Welding process changeover

Pulse arc welding machines only.
I
P
Program Setting option
P
Pulse arc welding process on/off
START
Changes using PC300.Net software
P /P
Welding process changeover
A B
If P
a changeover to the pulse arc process, and
vice versa.
Changes using PC300.Net software
(EXPERT machine series: Can also be
changed using M3.1x, see chapter "MIG/MAG
parameter overview, M3.1x")
P
Pulse arc welding process on/off
END
Changes using PC300.Net software
(Switched on for all forceArc JOBs in factory
settings)
The settings are saved with the JOB and apply to all programs for that JOB.
Item No.: 099-005073-EWM01
START
P
A
contains a standard arc process, there is
A
Functional characteristics
P
B
Figure 5-22
Relates to
All special, non-latched
All special, latched
Non-latched/latched mode
with alternating welding
process
Non-latched/latched special
with alternating welding
process
Latched special with
welding process
changeover
All special, non-latched
All special, latched
MIG/MAG welding
P
END
t
Setting
1 (= on)
0 (= off)
1 (= active)
0 (= inactive)
1 (= on)
0 (= off)
45