CAS LP-II Service Manual page 66

16 Troubleshooting
2. Printer prints but labels are
blank.
Scale 3. Printer is missing an entire
powers ON column (dot) of print on all
& goes to labels.
Zero (cnt'd.)
4. Printed data is faded in
whole or in part.
La bel Printed 1. A black or shaded box
O K except appears in the place of a
fo r a black specific printed field (Total
o r shaded Price, Unit Price, etc.)
b ox.
Make sure Print Head is in lock-down position.
Make sure that there is thermal labels or paper in the
printer and that the media is properly installed.
Check/replace Media (Labels or paper.)
Check/replace Wire Harness, J19 M-PCB.
Check/replace TPH Wire Harness, J13 M-PCB.
Check/replace Power Supply.
Check/replace Thermal Print Head.
Check/replace Printer Assembly.
Clean Th ermal Print Head.
Check/repl ace Wire Harness, J19 M-PCB.
Check/repl ace Thermal Print Head.
Check/replace Media (Labels or paper.)
Check/replace Media (Labels or paper.)
Clean Thermal Print Head.
Lower the Printer Speed.
Adjust Print Head.
Check/replace Rubber Roller, Platent.
Check/replace Wire Harness, J19 M-PC
Check/replace Thermal Print Head.
A field on the label format is not completely within
the label margins. Check/Reprogram the label format
with the problem.
A field on the label does not have enough space to
print its data, i.e. trying to print a 6 digit Total Price to a
label format that has a 5 digit total price.
Check/Reprogram the label format with the problem.
58
4.3, 5.1,
10.3, 12.5,
13.4, 14.6,
14.3, 17.5,
18.2, 19.8
4.3, 5.1,
10.3, 12.5,
14.6, 14.6.3,
18.2, 19.8
4.3, 5.1,
10.3, 12.5,
14 .4, 14.6,
14 .6.3, 17.5,
18.2, 19.8
B.