CAS LP-II Service Manual page 45

10 Printer Settings
Width: This value is the width of the label or paper and NOT the width of the liner backing paper. It must
be specified in millimeters. If this value is incorrect then some label formats may print properly but no
receipts or reports will print properly. The Width can be from 20 mm to 80 mm.
Feed: This value determines the amount of labels/paper to feed when you press the FEED key. The
Feed value can be 0 mm to 170 mm. The Feed field is only for type 1 or 2.
Rcpt Feed: This value is the amount of blank space to feed after each receipt, report, or label is printed.
This is done so that the paper cutter can tear the receipt or label properly. The Rcpt Feed can be from 0
mm to 170 mm. The Rcpt Feed field is only for type 1 or 2.
You can press SAVE or the ENTER key while the cursor is on the last field in order to save the current
screen contents and return to the previous menu, or press the ESC key to return to the previous menu.
37