Installing Options; Installing The Network Memory Card; Installing The Paper Cutter - CAS LP-II Service Manual

15 Installing Options

15.1 Installing the Network Memory Card

1. Make s ure t he power switch
2. Remove th keyboard: e
A. The 2 keyboard screws on top of the upper case
B. Lay the keyboard face dow
3.Plug the Network Card into connectors J
aligned properly and th
4.Attach the 2 grounding screws to the
5.Reassemble in reverse order.

15.2 Installing the Paper Cutter

1. Please m ake sure not to scrape the
2. Make sure that the Main Power switch
3. Set the Print Head to its locked-down
4. Remove the 2 front screws on the TPH
5. Attach the paper Cutter with the 2 fro
is OFF and t he scale is unplug
n.
5 & J6 on the Main PCB. Make sure
at the 2x9 con nect or is facing to the rear of the scale.
Ne tw ork Card PCB.
un dersurface of the Print Head at all times.
is OFF & that the scale is unplugged.
position.
Bracket.
nt screws.
ged
.
Do not over tighten.
56
that all of the pins are