CAS LP-II Service Manual page 56

14 Servicing and Parts Replacement
5. Remove the 4 screws on the corners of the uppercase.
6. Remove the key board:
7. Remove the 2 keyboard screws on top of the upper case.
Remove the keyboard grounding screw on the Main PCB.
A.
Unplug the keyboard cable from J7 on the Main PCB.
B.
8. Open printer side-door and remove 2 printer-bay screws.
9. Remove the 3 screws in the keyboard access
area.
10. Remove the upper case by sliding it
upwards.
48