Yealink SIP-T48G Administrator's Manual page 75

Local
Details of Configuration Parameters:
phone_setting.common_power_led_enable
Description:
Enables or disables the power indicator LED to be turned on.
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
Web User Interface:
Features->Power LED->Common Power Light On
Phone User Interface:
None
phone_setting.ring_power_led_flash_enable
Description:
Enables or disables the power indicator LED to flash when the IP phone receives an
incoming call.
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) red)
Web User Interface:
Features->Power LED->Ring Power Light Flash
Phone User Interface:
None
phone_setting.mail_power_led_flash_enable
Description:
Web User Interface
Parameters
Configuring Basic Features
h_enable
phone_setting.hold_and_held_power
_led_flash_enable
phone_setting.talk_and_dial_power_
led_enable
Configure the power indicator LED.
Navigate to:
http://<phoneIPAddress>/servlet?p=
features-powerled&q=load
Permitted
Values
0 or 1
0 or 1
0 or 1
Default
0
1
0
63