Yealink SIP-T48G Administrator's Manual page 257

Details of the Configuration Parameter:
Parameter
watch_dog.enable
Description:
Enables or disables Watch Dog feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will reboot automatically when the system is
broken down.
Web User Interface:
Settings->Preference->Watch Dog
Phone User Interface:
None
To configure watch dog feature via web user interface:
1. Click on Settings->Preference.
2. Select the desired value from the pull-down list of Watch Dog.
3. Click Confirm to accept the change.
Status indicators may consist of the power LED, MESSAGE key LED, line key indicator,
headset key indicator and the on-screen icon.
The following shows two examples of obtaining the IP phone information from status
ence&q=load
Permitted Values
0 or 1
Troubleshooting
Default
1
245