Yealink SIP-T48G Administrator's Manual page 48

Microsoft Lync Edition Administrator's Guide for SIP-T2_Series and T4_Series IP Phones
Note: It works only if the value of the parameter "network.ip_address_mode" is set to
0 (IPv4) or 2 (IPv4 & IPv6). If you change this parameter, the IP phone will reboot to
make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config->DHCP/PPPoE/Static IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4
network.ip_address_mode
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4 & IPv6
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->Internet Port->Mode(IPv4/IPv6)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IP Mode
network.internet_port.ip
Description:
Configures the IPv4 address.
Example:
network.internet_port.ip = 192.168.1.20
Note: It works only if the value of the parameter "network.ip_address_mode" is set to
0 (IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 2 (Static IP
Address). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
36
Parameters Permitted Values Default
0, 1 or 2
IPv4 Address Blank
0