Yealink SIP-T48G Administrator's Manual page 113

Parameters
Web User Interface:
Features->General Information->Use Logo
Phone User Interface:
None
lcd_logo.url
Description:
Configures the access URL of the custom logo file.
Example:
lcd_logo.url = http://192.168.10.25/logo.dob
During the auto provisioning process, the IP phone connects to the provisioning
server "192.168.10.25", and downloads the custom logo file "logo.dob".
Note: It works only if the value of the parameter "phone_setting.lcd_logo.mode" is
set to 2 (Custom logo). It is not applicable to SIP-T48G IP phones.
Web User Interface:
Features->General Information->Upload Logo
Phone User Interface:
None
lcd_logo.delete
Description:
Deletes all custom logo files.
Example:
lcd_logo.delete = http://localhost/all
Note: It is not applicable to SIP-T48G IP phones.
Web User Interface:
Features->General Information->Upload Logo
Phone User Interface:
None
To configure an image logo via web user interface:
1. Click on Features->General Information.
2. Select Custom logo from the pull-down list of Use Logo.
3. Click Browse to select the logo file from your local system.
Permitted Values
URL within 511
characters
http://localhost/all
Configuring Basic Features
Default
Blank
Blank
101