Yealink SIP-T48G Administrator's Manual page 161

Procedure
BToE can be configured using the configuration files or locally.
Configuration
<y0000000000xx>.cfg
File
Local Web User Interface
Details of Configuration Parameters:
Parameters
sip.btoe.enable
Description:
Enables or disables the BToE (Better Together over Ethernet) feature.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
None
Phone User Interface:
None
sip.btoe.as_audio_dev.enable
Description:
Enables or disables the IP phone to be used as an audio device when BToE (Better
Together over Ethernet) is enabled in the VDI (Virtual Desktop Infrastruture)
environment.
0-Disabled
1-Enabled
Note: We recommend that you set the value of this parameter to be 1 (Enabled) if
Configuring Basic Features
Configure BToE.
Parameters:
sip.btoe.enable
Configure BToE as audio device.
Parameters:
sip.btoe.as_audio_dev.enable
Configure BToE as audio device.
Navigate to:
http://<phoneIPAddress>/servlet?p=fe
atures-audio&q=load
Permitted Values
0 or 1
0 or 1
Default
1
0
149