Yealink SIP-T48G Administrator's Manual page 65

Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration
<y0000000000xx>.cfg
File
Local Web User Interface
Details of Configuration Parameters:
Parameters
auto_provision.power_on
Description:
Triggers the power on feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process when
powered on.
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
Configure the way for the IP phone to
check for configuration files.
Parameters:
auto_provision.power_on
auto_provision.repeat.enable
auto_provision.repeat.minutes
auto_provision.weekly.enable
auto_provision.weekly.begin_time
auto_provision.weekly.end_time
auto_provision.weekly.dayofweek
Specify the access URL of firmware.
Parameter:
firmware.url
Configure the way for the IP phone to
check for configuration files.
Navigate to:
http://<phoneIPAddress>/servlet?p=s
ettings-autop&q=load
Permitted Values
0 or 1
Getting Started
Default
1
53