Yealink SIP-T48G Administrator's Manual page 60

Microsoft Lync Edition Administrator's Guide for SIP-T2_Series and T4_Series IP Phones
0-As Router
1-As Bridge
Note: It works only if the value of the parameter "network.pc_port.enable" is set to 1
(Auto Negotiation). If you change this parameter, the IP phone will reboot to make
the change take effect. It is only applicable to SIP-T22(P) IP phones.
Web User Interface:
Network->PC Port->PC Port Config->As Bridge/As Router
Phone User Interface:
None
network.pc_port.ip
Description:
Configures the IP address of the PC (LAN) port.
Note: It works only if the value of the parameter "network.pc_port.enable" is set to 1
(Auto Negotiation) and "network.bridge_mode" is set to 0 (As Router). If you change
this parameter, the IP phone will reboot to make the change take effect. It is only
applicable to SIP-T22(P) IP phones.
Web User Interface:
Network->PC Port->PC Port Config->IP Address
Phone User Interface:
None
network.pc_port.mask
Description:
Configures the subnet mask of the PC (LAN) port.
Note: It works only if the value of the parameter "network.pc_port.enable" is set to 1
(Auto Negotiation) and "network.bridge_mode" is set to 0 (As Router). If you change
this parameter, the IP phone will reboot to make the change take effect. It is only
applicable to SIP-T22(P) IP phones.
Web User Interface:
Network->PC Port->PC Port Config->Subnet Mask
Phone User Interface:
None
network.pc_port.dhcp_server
48
Parameters Permitted Values
IP Address
Subnet Mask
0 or 1
Default
10.0.0.1
255.255.255.0
1