Yealink SIP-T48G Administrator's Manual page 37

Details of Configuration Parameters:
Parameters
network.static_dns_enable
Description:
Triggers the static DNS feature to on or off.
0-Off
1-On
If it is set to 0 (Off), the IP phone will use the IPv4 DNS obtained from DHCP .
If it is set to 1 (On), the IP phone will use manually configured static IPv4 DNS.
Note: It works only if the value of the parameter "network.internet_port.type" is set to
0 (DHCP). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static DNS
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->DNS Server->Static DNS
network.primary_dns
Description:
Configures the primary IPv4 DNS server.
Example:
network.primary_dns = 202.101.103.55
Note: It works only if the value of the parameter "network.static_dns_enable" is set
to 1 (On). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Primary DNS
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->DNS Server->Pri DNS
Phone User Interface
Permitted Values
IPv4 Address
Getting Started
?p=network&q=load
Configure the static DNS feature.
Configure static DNS address.
Default
0 or1 0
Blank
25