Yealink SIP-T48G Administrator's Manual page 180

Microsoft Lync Edition Administrator's Guide for SIP-T2_Series and T4_Series IP Phones
Local
Details of Configuration Parameters:
network.snmp.enable
Description:
Enables or disables SNMP (Simple Network Management Protocol) feature on the
IP phone.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect. It is only applicable to SIP-T48G IP phones.
Web User Interface:
Network->Advanced->SNMP->Active
Phone User Interface:
None
network.snmp.port
Description:
Configures the port used for SNMP (Simple Network Management Protocol)
communication.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect. It is only applicable to SIP-T48G IP phones.
Web User Interface:
Network->Advanced->SNMP->Port (1~65535)
Phone User Interface:
None
168
Web User Interface
Parameters
network.snmp.enable
network.snmp.port
network.snmp.trust_ip
Configure SNMP on the IP
phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Permitted Values
0 or 1
Integer from 1 to
65535
Default
0
161