Yealink SIP-T48G Administrator's Manual page 57

Local Web User Interface
Details of Configuration Parameters:
Parameters
network.internet_port.speed_duplex
Description:
Configures the transmission method of the Internet (WAN) port.
0-Auto Negotiate
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (only applicable to SIP-T48G IP phones)
Note: We recommend that you do not change this parameter. If you change this
parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Port Link->WAN Port Link
Phone User Interface:
None
network.pc_port.speed_duplex
Description:
Configures the transmission method of the PC (LAN) port.
0-Auto Negotiate
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (only applicable to SIP-T48G IP phones)
Note: We recommend that you do not change this parameter. If you change this
network.pc_port.speed_duplex
Configure the transmission methods
of the Internet (WAN) port.
Navigate to:
http://<phoneIPAddress>/servlet?p=
network-adv&q=load
Permitted Values
0, 1, 2, 3, 4 or 5
0, 1, 2, 3 ,4 or 5
Getting Started
Default
0
0
45