Yealink SIP-T48G Administrator's Manual page 31

variable-name = value
- Associate only one value with one variable.
- Separate each variable name and value with an equal sign.
Set only one variable per line.
-
- Put the variable and value on the same line, and do not break the line.
Comment the variable on a separated line. Use the pound (#) delimiter to
-
distinguish the comments.
When configuring particular features, you may need to upload resource files (e.g.,
language) to IP phones. If the resource file is to be used for all IP phones of the same
model, the resource file access URL is best specified in the <y0000000000xx>.cfg file.
However, if you want to specify the desired phone to use the resource file, the resource
file access URL should be specified in the <MAC>.cfg file.
The names of the Yealink-supplied template files are:
Template File
Configuration Files
Resource Files
You can ask the distributor or Yealink FAE for template files. You can also obtain the
template files online:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
To download template files:
1. Go to Yealink Document Download
SIP-T22) under the Documents and Downloads tab.
2. Download and extract the combined configuration files to your local system.
3. Open the folder you uncompressed to and identify the template file you will edit.
Common CFG file
MAC-Oriented CFG file
Language Packs
DST Template
Page and select the desired phone model (e.g.,
Getting Started
File Name
Common.cfg
MAC.cfg
For example,
0.GUI.English.lang,
lang+English.txt
AutoDST.xml
19