Yealink SIP-T48G Administrator's Manual page 112

Microsoft Lync Edition Administrator's Guide for SIP-T2_Series and T4_Series IP Phones
Procedure
The logo shown on the idle screen can be configured using the configuration files or
locally.
Configuration File
Local
Details of Configuration Parameters:
Parameters
phone_setting.lcd_logo.mode
Description:
Configures the logo mode of the LCD screen.
0-Off
1-System logo
2-Custom logo
If it is set to 0 (Off), the IP phone is not allowed to display a logo.
If it is set to 1 (System logo), the LCD screen will display the system logo.
If it is set to 2 (Custom logo), the LCD screen will display the custom logo (you need
to upload a custom logo file to the IP phone).
Note: It is not applicable to SIP-T48G IP phones.
100
<y0000000000xx>.cfg
Web User Interface
Permitted Values
0, 1 or 2
Configure the logo shown on the
idle screen.
Parameters:
phone_setting.lcd_logo.mode
Specify the access URL of the
custom logo file.
Parameters:
lcd_logo.url
Delete all custom logo files.
Parameters:
lcd_logo.delete
Configure the logo shown on the
idle screen.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Default
0