Yealink SIP-T48G Administrator's Manual page 255

Local
Details of the Configuration Parameter:
Parameter
network.span_to_pc_port
Description:
Enables or disables the IP phone to span data packets received from the WAN
(Internet) port to the PC (LAN) port.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), all data packets from WAN port can be received by PC
port.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->Span to PC->Span to PC Port
Phone User Interface:
None
To enable span to pc port via web user interface:
1. Click on Network->Advanced.
Web User Interface
Permitted Values
0 or 1
Troubleshooting
Configure span to PC Port.
Navigate to:
http://<phoneIPAddress/s
ervlet?p=network-adv&q
=load
Default
0
243