Yealink SIP-T48G Administrator's Manual page 53

Details of Configuration Parameters:
Parameters
network.internet_port.type
Description:
Configures the Internet (WAN) port type for IPv4.
0-DHCP
1-PPPoE
2-Static IP Address
Note: It works only if the value of the parameter "network.ip_address_mode" is set to
0 (IPv4) or 2 (IPv4 & IPv6). If you change this parameter, the IP phone will reboot to
make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config->DHCP/PPPoE/Static IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4
network.pppoe.user
Description:
Configures the user name for PPPoE connection.
Example:
network.pppoe.user = Xmyl0592123
Note: It works only if the value of the parameter "network.ip_address_mode" is set to
0 (IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 1 (PPPoE). If you
change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Phone User Interface
Getting Started
password for PPPoE on the IP
phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Configure PPPoE on the IP phone.
Configure the user name and
password for PPPoE on the IP
phone.
Permitted Values
0, 1 or 2
String within 32
characters
Default
0
Blank
41