Yealink SIP-T48G Administrator's Manual page 62

Microsoft Lync Edition Administrator's Guide for SIP-T2_Series and T4_Series IP Phones
Phone User Interface:
None
To enable the PC port via web user interface:
1. Click on Network->PC Port.
2. Select Auto Negotiation from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
To disable the PC port via web user interface:
1. Click on Network->PC Port.
2. Select Disabled from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
50
Parameters Permitted Values Default