Yealink SIP-T48G Administrator's Manual page 59

Local
Details of Configuration Parameters:
Parameters
network.pc_port.enable
Description:
Enables or disables the PC (LAN) port.
0-Disabled
1-Auto Negotiation
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->PC Port->PC Port Active
Phone User Interface:
None
network.bridge_mode
Description:
Configures the PC (LAN) port type.
Web User Interface
Permitted Values
Getting Started
Parameter:
network.bridge_mode
Configure network parameters of
the PC port.
Parameter:
network.pc_port.ip
network.pc_port.mask
network.pc_port.dhcp_server
network.dhcp.start_ip
network.dhcp.end_ip
Configure the PC port mode.
Configure the PC (LAN) port type.
Configure network parameters of
the PC port.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network-pcport&q=load
Default
0 or 1
0 or 1
1
1
47